How about the performance of SLS Polystyrene
![SLS Polystyrene](https://www.wkproto.com/wp-content/uploads/2022/01/materia10.jpg)
SLS Polystyrene (PS)
This foamed white, amorphous or semi-crystalline thermoplastic has medium hardness and low impact resistance. 3D-printed parts made from PS are used to make master models for vacuum, plaster and ceramic shell castings.
Max Build Size:700 x 700 x 500 mm Min Build Size:50 x 50 x 50 mm
Default Layer Height:0.2 mm Optional Layer Heights: 0.2 mm
Tolerance:±0.2% (with a lower limit of ±0.2 mm) Heat Endurance:Up to 100 ℃
Available Colors:White
Available Post Process: none
Suitable For
investment casting
Not Suitable For
Complex designs with intricate details,
Fine-detail models with smooth surfaces
Additional Info
Parts printed with PS are quite fragile, please handle with care, WKproto also provides investment casting service, if you need the final casted parts, you can directly request a casting service to avoid the risk of damage during shipment.
Other news
- 1How about the performance of SLA Dark Tough Resin
- 2What is the process and application of Electrical Discharge Machining
- 3The Production Process of SLA Clear Resin
- 4What is anodizing aluminum and Process Benefits
- 5What are the key aspects of rapid prototyping
- 6What are the advantages of 3D printing
- 7How about the performance of MJF Nylon PA 11
- 8what is painting in surface finishing
- 9Everything About PLA, the 3D Printing Material
- 10What kinds of 3D printed drone parts are available