How about the performance of MJF Nylon PA 12

MJF Nylon PA 12

This nylon material has excellent mechanical properties, with strength and density exceeding that of parts produced on other powder bed printing technologies. The strength makes it an excellent choice for functional parts, such as drone parts, RC cars, mechanical fixtures, camera mounts and phone cases. The surface is semi-glossy and somewhat granular, also making it a great material for jewelry, home decor, toys and games. HP Nylon Plastic can be thought of as a general use plastic that has a wide range of applications.

Max Build Size:380 x 380 x 280 mm Min Build Size:5 x 5 x 5 mm
Default Layer Height:0.08 mm Optional Layer Heights: 0.08 mm
Tolerance:±0.2% (with a lower limit of ±0.2 mm) Heat Endurance:Up to 175 ℃

Available Colors:Black
Available Post Process: Sandblast Paint

Suitable For
Functional prototypes and end products,
Complex designs with intricate details,
Moving and assembled parts,
Cavities within design (unless making use of escape holes),
Form and fit testing,
Functional prototyping and testing

Not Suitable For
Cavities within design (unless making use of escape holes)
Products requiring smooth surface

Additional Info
Thicker models are more difficult to bend

Flexibility depends on the structure and design of the model. The thicker you make something, the less flexible it will be.

Print lines or “Stepping”

Depending on the shape of your model and orientation in the print tray, you might see print lines, or “stepping” phenomena on your model, which is a natural artifact of 3D printing. 3D printing works by printing layer by layer, and while our layers are around 0.08mm thin, there is a “step” between each layer, much like a staircase.