How about the performance of FDM PLA

FDM PLA

PLA is the most common and lowest cost 3D printing material. Unsuitable for high temperature applications. PLA is more brittle than ABS with a lower impact strength and elongation before break. Large color selection.

Max Build Size:1200 x 1200 x 1500mm Min Build Size:5 x 5 x 5 mm
Default Layer Height:0.2 mm Optional Layer Heights: 0.2,0.1 mm
Tolerance:±0.2% (with a lower limit of ±0.2 mm) Heat Endurance:Up to 80 ℃

Available Colors: Multiple colors
Available Post Process: Polish

Suitable For
Cases, holders, adapters,
Large models,
Low-cost prototype

Not Suitable For
Functional prototypes and end products,
Complex designs with intricate details,
Fine-detail models with smooth surfaces,
Moving and assembled parts,
Cavities within design (unless making use of escape holes),
Functional prototyping and testing,
Jewelry, art

Additional Info
The printing process creates visible stepping between layers. Support structures are generated to scaffold overhangs, which are manualay removed after printing. The stepping and support structures create a coarse and sometimes rough surface. This is a great material to use for prototyping and perfecting your final design.